Nickel-Electro Digital Lab Drying Oven NE9 Series

Price range: £63.04 through £3,967.56

Description

NE9 Series Digital Lab Drying Ovens.

The Clifton Range Digital Laboratory Ovens by Nickel-Electro offer precision temperature control from ambient +5°C to 300°C with timer functions.

Models Available: NE9-15S, NE9-32S, NE9-56S, NE9-112S, NE9-240S.

These lab ovens can run at set temperature immediately, use run back timer or enable a delay start feature. Can be configured for gravity convection or with variable fan speed providing forced air circulation within the chamber.

The oven chamber is constructed from high quality stainless steel with high efficiency thermal insulation, contained within an outer steel housing with anti-bacterial paint finish.

With energy efficiency in mind, particular attention is paid to robust design, insulation, a tight door closure with silicone seal and hinge design to maintain chamber temperatures with intelligent temperature control.

Temperature Range : Ambient +5°C – 300°C.

3 YEAR WARRANTY:
The NE9 Series comes with a 3 year warranty as standard, we also offer free advice and support.

MADE IN GREAT BRITAIN:
The NE9 Series is made here in Great Britain with the highest quality of materials.

Product Code NE9-15S NE9-32S NE9-56S NE9-112S NE9-240S
Chamber Capacity 15 Litres 32 Litres 56 Litres 112 Litres 240 Litres
Temperature Range Ambient + 5°C – 300°C
Temperature Control PID Digital, LED display showing actual or set temperature, resolution 0.1°C
Temperature Alarm Over temperature alarm is automatically set 5°C above set point
Temperature Sensor pt100 with control diagnostics at power up
Temperature Fluctuation ±0.4°C at 150°C
Temperature Variation ±1.8°C at 150°C
Temperature Heat Up 150°C 25 Minutes
Temp. Door Open Recovery 150°C 5 Minutes
Temp. Control & Run Back Timer Visual indicator and end messaging 00:01 to 99:59 (hh:mm) activates at set temp
Temp Control & Delay Start Timer Heating commences at a set time in the future, within 24 hours
Chamber Convection Fan speed can be set from 0% gravity convection within the chamber variable to 100% for forced air convection
Exhaust Air Flap Adjustable 0 to 100% chamber venting
Access Port 35mm port size, perforated flap cover helps to reduce losses when fitting independent external probes or thermocouples
Doors Single insulated door, lockable with 2 point door engagement for an even seal
Door Alarm Door open, heating interrupted, delay before door sounder chimes until door closed, heating resumes
Shelves Fitted & Max. 1 wire / 3 max 2 wire / 5 max 2 wire / 8 max 3 wire / 10 max
Shelving Locations Available every 20mm vertically
Shelf Maximum Load 10 kg 20 kg
Heater Power (220-240V) 1050W 1100W 2150W 3200W
Voltage 230V 50-60Hz 230V 50/60Hz blue power plug 2P+E
Stackable ✅ ❌
Feet/Castors Levelling feet
Dimensions
External (mm) 520w x 390d x 600h 600w x 460d x 680h 600w x 605d x 720h 600w x 660d x 980h 800w x 720d x 1160h
Internal (mm) 320w x 180d x 240h 400w x 250d x 320h 400w x 400d x 360h 400w x 450d x 620h 600w x 510d x 800h

Features and Benefits:

Clifton lab ovens feature intuitive easy to use controls with a bold illuminated LED display, offering precise temperature control from ambient +5°C to 300°C with timer functions.

Featuring bold illuminated LED display of measured temperatures in real-time, in increments of ±0.1°C with intuitive controls, utilising touch sensitive keypads. Indicators for heating, timer and alarm.

3 Year Warranty.

Broad range of accessories available to suit wide range of applications.

Before leaving our factory every product is identified with a unique serial number and undergoes a factory calibration adjusting control to known traceable value. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.

The chamber is constructed from high quality stainless steel with high efficiency thermal insulation, contained within an outer steel housing with anti-bacterial paint finish.

Safety Features:

Switching on the controls undergoes an automatic diagnostic check.

Features a temperature sensor fail alarm with error reporting on LED screen.

Over temperature alarm is automatically set 5°C above set point.

Door open – heating is interrupted, after a short delay a door sounder chimes until door is closed, heating resumes.

Fitted with Class 1 oven temperature thermostat for overall unit protection.

Controls:

Featuring bold illuminated LED display of measured temperatures in real-time, in increments of ±0.1°C with intuitive to use controls, utilising touch sensitive keypads. Indicators for heating, timer and alarm. Exhaust air flap is dial adjustable from 0 to 100% for chamber venting. Fan chamber convection variable from 0% to 100%. Fan convection improves temperature uniformity and heating recovery time. Door, lockable with 2 point door engagement for an even seal. Left hand side of the oven features a 35mm diameter access port, with perforated flap cover, to reduce heat loss when used with external probes.

Notes:
Before ordering please check the room or building access where this unit will be installed and electrical power requirements. Temperature fluctuation measurements are based on temperature readings on the shelf in centre of the chamber. Drying ovens up to 112 litres are stackable. Do not place in direct sunlight or near a heat or cold source. Allow a 100mm air gap away from the wall at rear. Ensure there is a minimum 300mm air gap from top of the unit to ceiling.

Accessories available in the drop down menu:

Wire Shelf

Perforated Stainless Steel Shelf

Stainless Steel Test Tube Racks

Stainless Steel Wire Test Tube Racks

Additional Program Function RT-3:
Additional program functionality with temperature and time ramps. Factory installation at the time the model is ordered.

Factory Calibration 1 Point CAL:

1. Factory calibration record.
2. The completed calibration record will be enclosed at the rear of the instruction book accompanying the Clifton unit carrying the following information:
Unique record number for traceability.
Serial number of the unit.
Instrument it was checked against.
Calibration temperature and actual sensitivity results.
3. The measurement of uncertainty ±0.8°C. Ambient temperature 21°C ±3°C.
Notes:
A. The calibration record provides a measurement of precision about set point with maximum and minimum sensitivity readings obtained. Precision is defined as “(1) The ability of a measurement to be consistently reproduced” and “(2) The number of significant digits to which a value has been reliably measured”.
B. The calibration record does not provide or assures any form of accuracy. Accuracy is defined as “the ability of a measurement to match the actual value of the quantity being measured.

Temperature Survey 9 Point CAL-9:

1. Temperature survey chamber. 2. The completed calibration record will be enclosed at the rear of the instruction book accompanying the Clifton unit carrying the following information: Unique record number for traceability. Serial number of the unit. Instrument it was checked against. Calibration temperature and actual sensitivity results.
To be ordered with equipment.

Temperature Survey 27 Point CAL-27:

1. Temperature survey chamber. 2. The completed calibration record will be enclosed at the rear of the instruction book accompanying the Clifton unit carrying the following information: Unique record number for traceability. Serial number of the unit. Instrument it was checked against. Calibration temperature and actual sensitivity results. To be ordered with equipment.

Additional information

Option

NE9-15S Digital Lab Drying Oven, NE9-32S Digital Lab Drying Oven, NE9-56S Digital Lab Drying Oven, NE9-112S Digital Lab Drying Oven, NE9-240S Digital Lab Drying Oven, Wire Shelf WS-15 NE9-15S, Wire Shelf WS-32 NE9-32S, Wire Shelf WS-56 NE9-56S, Wire Shelf WS-112 NE9-112S, Wire Shelf WS-240 NE9-240S, Perforated Stainless Steel Shelf SP-15 NE9-15S, Perforated Stainless Steel Shelf SP-32 NE9-32S, Perforated Stainless Steel Shelf SP-56 NE9-56S, Perforated Stainless Steel Shelf SP-112 NE9-112S, Perforated Stainless Steel Shelf SP-240 NE9-240S, Stainless Steel Test Tube Rack 6870 – (26 holes x 17mm diameter), Stainless Steel Test Tube Rack6871 – (16 holes x 26mm diameter), Stainless Steel Test Tube Rack6872 – (36 holes x 13mm diameter), Stainless Steel Test Tube Rack6873 – (18 holes x 19 diameter), Stainless Steel Test Tube Rack6900 – (12 holes x 32mm diameter), Stainless Steel Wire Test Tube Rack 6901 – (12 x 17mm diameter), Stainless Steel Wire Test Tube Rack 6902 – (24 x 20mm diameter), Stainless Steel Wire Test Tube Rack 6903 (36 x 20mm diameter), Stainless Steel Wire Test Tube Rack6904 (48 x 20mm diameter), Stainless Steel Wire Test Tube Rack 6905 (12 x 25mm diameter), Stainless Steel Wire Test Tube Rack 6910 – (48 x 26mm diameter), Additional Program Function RT-3 Available for all NE9 ovens, Factory Calibration 1 Point CAL Available for all NE9 ovens, Temperature Survey 9 Point CAL-9 Available for all NE9 ovens, Temperature Survey 27 Point CAL-27 Available for all NE9 ovens

Reviews

There are no reviews yet.

Be the first to review “Nickel-Electro Digital Lab Drying Oven NE9 Series”

Your email address will not be published. Required fields are marked *