Sludge Judge II

£78.00 – £256.50

The Sludge Judge II® is designed to take to take accurate readings of settled solids, 5% or less, in a variety of liquids, to any depth. It is ideal for use anywhere that accurate sample levels of settled solids in non-caustic materials are needed. Large Capacity
The Sludge Judge II when assembled it holds 178ml per 0.3 metres. That is double the capacity of the original Sludge Judge. Consists of 3 x 153cn (3ft) sections of 3.18cm (1 1/4inch) diameter plastic pipe. Total length 15ft (4.6M).

SKU: Sludge Judge-1 Categories: ,

Description

The Sludge Judge® II is made from a 31.8mm outside diameter plastic tubing resulting in double the capacity and a very rigid unit when assembled. the unit is made up of three 1.53m sections (top, extension, bottom) or individual sections can be combined as required.

Seperate sections and cleaning brushes are also available.

To use:
1. Slowly lower the Sludge Judge® to the bottom of the tank. The float valve opens, allowing materials to flow in. When the bottom has been reached and the pipe has filled to the surface level, tug slightly on the rope as the unit is raised. This sets the check level, trapping the mixture inside.
2. When the unit has been raised clear if the liquid, the amount of solids in the sample can be read using the 0.31m increments marked on the pipe sections.
3. To release the material in the unit, touch the pin extending from the bottom section against a hard surface. This opens the check valve to drain the sample.

Related products