Your Cart
| Product Code | NE2-4D | NE2-8D | NE2-10D | NE2-14D | NE2-22D | NE2-28D | NE2-56D |
| Chamber Capacity | 4 Litres | 8 Litres | 10 Litres | 14 Litres | 22 Litres | 28 Litres | 56 Litres |
| Temperature Range | Ambient + 5°C – 100°C | ||||||
| Temperature Control | PID Digital, LED display showing actual or set temperature, resolution 0.1°C | ||||||
| Temperature Alarm | Over temperature alarm is automatically set 4˚C above set point | ||||||
| Sensitivity | ±0.2°C | ||||||
| Uniformity | ±0.1°C | ||||||
| Heater Power (220-240V) | 400W | 800W | 1000W | 1500W | 2500W | ||
| Voltage | 120V or 230V models available 50-60Hz | ||||||
| Drain Tap Fitted | |||||||
| Dimensions | |||||||
| External (mm) | 332w x 185d x 290h | 332w x 270d x 290h | 332w x 270d x 290h | 361w x 332d x 290h | 538w x 332d x 290h | 660w x 540d x 290h | |
| Internal (mm) | 300w x 150d x 150h | 300w x 240d x 150h | 300w x 240d x 200h | 325w x 300d x 150h | 500w x 300d x 150h | 500w x 300d x 200h | 620w x 500d x 200h |
| Water Level Max. (mm) | 130 | 180 | |||||
| Max Depth Above False Base (mm) | 115 | 165 | |||||
| Water Level Min. (mm) | 55 | ||||||
Features and Benefits:
The shelf in the stainless steel tank provides a stable support for flasks/bottles/racks that can be removed for cleaning.
3 Year Warranty.
Broad range of accessories available to suit wide range of applications.
Before leaving our factory every water bath is identified with a unique serial number and undergoes a factory calibration adjusting control to known traceable value. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.
Painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments.
Safety Features:
Thermal cut out fitted in the heater.
IP rated clear booted on/off power switch.
Bath fitted with non-slip rubber feet.
Over temperature alarm automatically set 4˚C above set temperature with visual indicator and heating is turned off protecting samples from overheating.
Energy Consumption:
0.2kWh @ 37°C
0.21kWh @ 60°C – lid fitted (Based on NE2-4D)
The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and consumption measured at set point. Please remember that the energy consumption may vary due to factors such as location, ventilation, ambient temperatures and loading.
Controls:
Featuring bold LED display of measured temperatures in real-time, increments of 0.1°C, using precision PID temperature control. Settings retained even after turning the unit off. Easy to use splash proof controls, touch keypads for setting temperature values with indicators for heating and over temperature alarm. Features auto setting over temperature alarm protecting samples at set temperature. Every unit undergoes a factory calibration at two temperatures for validation.
Heating and Sensors:
Heaters and temperature sensor are concealed under the tank providing an easy to clean working area. The heating footprint covers the underside of the tank and with a low mass provides rapid energy transfer, resulting in quicker heat up times and a reduction in energy consumption and improved temperature uniformity.
Heating Information:
Above 60°C it is recommended that to achieve optimum performance the bath should be covered with a lid or layer of polypropylene spheres – see accessories. Covering the bath with a lid reduces energy consumption and running costs. This range of baths will operate at 100°C however are not designed for continuous boiling, the NE1B boiling bath range is recommended.





Reviews
There are no reviews yet.